This is a Edwards replacement interstage plate for the E2M40 MK2 rotary vane pump. The interstage plate separates the high vacuum and low vacuum stages inside the pump. If you are rebuilding your E2M40 pump, this is the correct OEM replacement part.
The interstage plate separates the high vacuum and low vacuum stages inside the pump. If you are rebuilding your E2M80 pump, this is the correct OEM replacement part.
This valve controls the flow of gases between the third and fourth pumping stages in your multi-stage dry vacuum pump. If you are rebuilding your pump, this is the correct OEM replacement part.
This is the Edwards IPV40EKA Inline Solenoid Valve. It runs on 240V power and has an aluminum body. It is designed for automatic vacuum isolation in high vacuum systems down to 1×10⁻⁹ mbar.
This is the Edwards IPV40PKS. It is an inline isolation valve with a stainless steel body. It uses compressed air to open and a spring to close. It is designed for high-speed actuation in high vacuum systems.
This is a Edwards replacement Co-Seal for ISO100 flanges. It has an FKM (Viton) rubber seal. The GP means general purpose. This Co-Seal eliminates crevices and trapped gas volumes. It is designed for high vacuum down to 10⁻⁸ Torr.
This is a Edwards replacement Co-Seal for ISO160 flanges. The “VIT” means it has a Viton (FKM) rubber seal. The “RED” is likely a color marking. This Co-Seal eliminates crevices and trapped gas volumes. It is designed for high vacuum down to 10⁻⁸ Torr.
This is a Edwards replacement Co-Seal for ISO40 flanges. The “FKM” means it has a Viton rubber seal. “GP” stands for General Purpose. The part number is B27158457 . This Co-Seal eliminates crevices and trapped gas volumes. It is designed for high vacuum down to 10⁻⁸ Torr
This is a Edwards replacement Co-Seal for ISO63 flanges. The “FKM” means it has a Viton rubber seal. “GP” stands for General Purpose. The part number is B27158064. This Co-Seal eliminates crevices and trapped gas volumes. It is designed for high vacuum down to 10⁻⁸ Torr.
This is a Edwards replacement Co-Seal for ISO63 flanges. It has a Nitrile (NBR) rubber seal, which offers excellent resistance to mineral oils and fuels. This Co-Seal eliminates crevices and trapped gas volumes. It is designed for high vacuum down to 10⁻⁸ Torr .
This is a Edwards replacement jacking foot kit. It comes as a pack of 4 feet (PK4). These are the small adjustable feet that screw into the bottom of your vacuum pump. They allow you to level the pump and keep it stable on the floor.
This is a Edwards replacement inlet pack for E2M40 and E2M80 rotary vane pumps. It includes the seal carrier, the coupling flange, and the bolts needed to secure a KF40 flange to the inlet of your pump . If you are replacing a damaged inlet connection, this is the correct OEM kit.
This is the small outer cam for Kinney rotary piston vacuum pumps. It carries part number P806291. This cam is a key part that helps your pump run the way it should. Made for the Kinney KT300C and KT300D models, this piece replaces the old or worn cam in your pump.
This is the outer small piston slide for Kinney rotary piston vacuum pumps. It carries part number P806289. This slide is a key part that helps the piston move smoothly inside your pump. Made for the Kinney KT300C and KT300D models, this piece replaces the old or worn slide in your pump
This is the complete sight glass assembly for your Kinney KC5, KC8, or KC15 rotary piston pump. It lets you see the oil level at a quick glance. The kit includes the glass, the housing ring, the background ring, screws, and all the gaskets you need. Everything comes in one box, ready to install .
The large center slide pin (Part# P805005) is a key internal part that helps the piston move smoothly. If this pin is worn, your pump cannot create strong vacuum. This is the exact replacement part for these Kinney rotary piston pumps.
This is the Kinney Large Center Piston Slide, Part# 806288. It is used on the Kinney brand of Rotary Piston family . This engineered component ensures smooth and reliable pump operation. Crafted for durability, the slide is designed to fit seamlessly, providing essential support to optimize your pump’s performance . This part is also included as a critical component in Major Rebuild Kits for the Kinney KT300C and KT300D pumps .
The small outer slide pin (Part# P805004) is a key internal part that helps the piston move smoothly. If this pin is worn, your pump cannot create strong vacuum. This is the exact replacement part for these Kinney rotary piston pumps.
Kinney KMBD booster pumps running in perfect sync with this Timing Gear Set. Designed to fit both the KMBD 850 and KMBD 1600 models, this set ensures that your pump’s internal parts rotate at the right time with each other.
It is a specialized filter element used inside the oil system of E1M175 and E2M175 rotary vane pumps. It acts as a strainer to keep contaminants out of the oil flow. If you are doing a major overhaul, this is the correct OEM part.
Not a member? Create an account
Already got an account? Sign in here
