$157.50
The NW25 Stainless Steel Elbow (Part # C10514420) is a Edwards vacuum component. It is a 90-degree elbow fitting used to change the direction of your vacuum plumbing . It has NW25 (KF25) flanges on both ends.
NW25 ELBOW STAINLESS STEEL
NW25 ELBOW STAINLESS STEEL
This NW25 Stainless Steel Elbow is the Edwards component. It is designed to connect two NW25 (KF25) vacuum components at a right angle. It is the standard fitting for changing direction in ISO-KF vacuum systems .
This elbow is made of AISI 316L stainless steel (also known as SUS316L) . 316L is a high-grade alloy. It is the standard material for vacuum plumbing for several reasons:
Excellent corrosion resistance: It stands up to chemicals, moisture, and aggressive process gases.
Low outgassing: It releases very little gas into your vacuum system. This is critical for achieving high vacuum levels.
Strength and durability: It will not bend, warp, or crack under stress.
Non-magnetic: It is safe for sensitive applications.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
This is a cylindrical roller bearing for Edwards E1M80 and E2M80 vacuum pumps.
This is a PFPE-lubricated ball bearing used on Edwards EH Booster and QMB Blower pumps . It fits models QMB250, EH250, QMB500, and EH500.
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
The COUPLING COVER EH250/500 C/SEAL PK 1 is a complete replacement cover for the Edwards EH250 and EH500 mechanical booster pumps. It comes with the seal already included. This cover bolts onto the side of the pump where the motor connects. It protects the coupling area and holds the oil inside. If your existing cover is cracked, leaking oil, or damaged, this is the direct replacement you need. It fits both the EH250 and EH500 pump models .
10 in stock
10 in stock
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
10 in stock
10 in stock
This is a inner ring for needle roller bearings used in Edwards vacuum pumps and boosters. It features a 30mm inner diameter, a 35mm outer diameter, and is 18mm wide .
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.