$54.11
This 1-inch reinforced PVC tubing is designed for use with the Leybold Sogevac SV1200 vacuum pump . The tubing is made from durable polyvinyl chloride (PVC) with internal reinforcement for extra strength. It is flexible, resistant to chemicals and weathering, and is used for fluid and gas transfer in your vacuum system . A direct replacement that ensures reliable connections .
Tubing, PVC, Reinforced, 1", Leybold, Sogevac
Tubing, PVC, Reinforced, 1", Leybold, Sogevac
This tubing is a direct replacement for OEM part . It is 1 inch in diameter and comes cut to the correct length for your SV1200 pump. It is ready to install. On the SV1200 pump, this tubing is typically used as part of the oil return circuit. The pump has an exhaust filter that traps oil mist. That captured oil needs to flow back down into the pump’s oil case. This reinforced tubing carries that oil back
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
The NW25 Stainless Steel Elbow (Part # C10514420) is a Edwards vacuum component. It is a 90-degree elbow fitting used to change the direction of your vacuum plumbing . It has NW25 (KF25) flanges on both ends.
The KF25 to 3/4″ BSP Adaptor (Part # C10501714) is a Edwards fitting. It converts a KF25 (NW25) vacuum port to a 3/4 inch BSP male thread . This adaptor is often used to connect Edwards EMF oil mist filters to pump exhaust ports.
The NW25 Polymer Centering Ring (Part # C10514394) is a Edwards vacuum component. It is used to create a vacuum seal between two NW25 (KF25) flanges. This centering ring features a polymer support ring combined with an FKM (fluoroelastomer/Viton) O-ring.
The NW25 Centering Ring (Part # C10514396) is a Edwards vacuum component. It is the standard gasket used to create a reliable seal between two NW25 (KF25) vacuum flanges. This centering ring features a stainless steel (S/S) carrier equipped with a nitrile (NBR) rubber O-ring .
The NW20/25 Metal Seal (Part # C27159005) is a Edwards vacuum component. It is a specialized centering ring, often called a “Co-Seal,” used to create a vacuum seal between two NW20 or NW25 (KF20/KF25) flanges .
This G1/4 Oil Plug (Part #415000071) is a replacement part designed specifically for the Busch R5 160C vacuum pump . Its main job is to seal the oil port, preventing leaks and keeping your pump’s oil where it belongs. This simple but critical component ensures proper lubrication and helps extend the life of your pump.
The NW25 Blank Flange (Part # C10514366) is a Edwards vacuum component. It is a stainless steel cap used to seal an unused NW25 (KF25) vacuum port . This blank flange is the standard way to close off a connection point on your vacuum system.
The ISO40 Bolted to ISO63 Adapter (Part # C10007087) is a Edwards vacuum fitting. It is made of stainless steel (S/S) . This adapter connects a component with an ISO63 bolted flange to a component with an ISO40 bolted flange .It is commonly used to connect Edwards dry pumps (like the QDP or iQDP series) to booster pumps (like the QMB series)
The NW25 Stainless Steel Clamping Ring (Part # C10514501) is a Edwards vacuum fitting. This is the standard stainless steel clamp used to connect two NW25 (KF25) vacuum flanges. It is labeled
The NW10/16 Polymer Swing Clamp (Part # C10512304) is a Edwards vacuum fitting. This is a lightweight, hinged “swing clamp” used to connect NW10 or NW16 (KF10/KF16) vacuum flanges . It is made of durable black polymer and features a hinged design for quick, tool-free connection and disconnection of vacuum lines .
10 in stock
This reducer nipple is made for the Leybold Sogevac SV1200 vacuum pump . It connects a 3/4″ NPT female thread to a 1/2″ NPT female thread. This fitting allows you to attach smaller accessories or hoses to the larger port on your pump. A direct replacement that fits perfectly.
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.