$66.22
This is a replacement vane with part number 3302040PP for DVP vacuum pumps. It is made of GX material and is compatible with DVP LC.150 and LC.105 pump models . This vane is an essential component for generating flow inside your pump.
Vane, DVP LC.150 - Part # 3302040
Vane, DVP LC.150 - Part # 3302040
This vane is made from GX material. GX is a high-quality material chosen for its durability and wear resistance in lubricated pump environments.This vane is designed for use with DVP LC.150 pumps . It is also listed as a component part inside the DVP Service Kit for LC.105 (Part # K9603021/1PP) , where the kit includes 3 pieces of this vane .
The DVP LC Series pumps are single-stage rotary vane pumps, known for their simple, robust construction and reliable operation .
Model LC.150: This is a single-stage rotary vane pump. It moves about 150 cubic meters of air per hour and can pull down to a strong vacuum of 0.5 mbar / 200 pa . It has a motor power of 3.0 kW and weighs about 80 kg
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
Keep your DVP LB.40 vacuum pump sealed tight with this ring gasket. This gasket fits between pump components to prevent air and oil leaks. A small but critical part for maintaining strong vacuum performance. OEM quality direct replacement.
10 in stock
Keep your DVP LC 105 vacuum pump running clean with this gas ballast filter. This filter cleans the air that enters your pump through the gas ballast valve. A clean gas ballast system helps remove water vapor and condensable gases from your pump oil. OEM quality direct replacement.
This Ring Gasket (Part # 4505025) is the exact seal you need when servicing your pump. If you are changing oil or cleaning the inside, replace this gasket to stop air leaks and keep your vacuum strong.
25 in stock
10 in stock
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
Keep dirt out of your DVP LC.12 pump. This Perforated Screen (Part # 4503005) acts like a strainer. It catches small particles and debris before they can damage sensitive internal parts. Check and clean this screen during routine maintenance.
10 in stock
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.