This is Edwards Drystar 2 Coolant for dry vacuum pumps . The bottle contains 0.9 litres of concentrate. You mix it with water to make 2.0 litres of ready-to-use coolant . Works for QDP, EDP, iXH, CDX, GV, and HV series pumps .
This is a replacement Cooling Coil Assembly for Edwards E1M275 and E2M275 rotary vane pumps. It cross-references to Edwards OEM number 34701008. This coil is part of the water cooling system that keeps your pump from overheating.
This is a replacement Cooling Coil Assembly for the Edwards EH1200 mechanical booster pump. The coil is part of the water cooling system that keeps the pump at the right temperature during operation.
This is a replacement Cooling Coil for Edwards EH2600 and EH4200 mechanical booster pumps. This coil is part of the water cooling system. It keeps the pump at the right temperature during operation.
Keep your Edwards nXDS dry scroll pump running cool with this Cooling Fan Kit
This is an NW50 Co-Seal centering ring. It comes with a Viton O-ring installed. It is compatible with Edwards vacuum systems. This centering ring is placed between two NW50 flanges. The clamp then squeezes the flanges together to create a vacuum seal.
This is the Edwards Cotter Pin. Part number P211284039. It is used on Edwards E1M275 and E2M275 pumps within the E1/E2M family . This pin prevents nuts and bolts from loosening due to vibration.
This Coupling Baffle is a replacement part designed for the coupling cover assembly. It helps control oil flow and stops excess mist from escaping the gearbox.
The COUPLING BAFFLE EH500 is a replacement part made for the Edwards EH500 Mechanical Booster Pump. It sits inside the coupling-cover assembly. Its main job is to manage oil flow and reduce oil mist escaping from the gearbox area. This simple part helps keep your pump clean and running smoothly for longer.
The COUPLING BOSS is a replacement part made for Edwards EH Series Mechanical Booster Pumps. It is an important part of the hydrokinetic coupling assembly. This assembly connects the motor to the pumping mechanism. The coupling boss helps transmit power smoothly from the motor to the pump rotors. If this part wears out, your pump may not run correctly. Replace it to keep your pump working like new.
The COUPLING BOSS FAN ASSEMBLIES is a replacement part set made for Edwards EH Series Mechanical Booster Pumps. This assembly includes both the coupling boss and the cooling fan. The coupling boss connects the motor to the pump drive. The fan attaches to the boss and keeps the coupling area cool during operation. If your pump runs hot or the drive feels loose, this assembly may need replacement. Get both parts together in one convenient set.
The COUPLING BOSS FOR E2M28 PK1 is a replacement part made for the Edwards E2M28 rotary vane vacuum pump. This small metal part is a key piece of the drive coupling assembly. It connects the motor shaft to the pump shaft. Without a good coupling boss, the motor cannot turn the pump. If your pump is not pulling vacuum or making strange noises, this part may be worn out. Replace it to get your pump running again.
The COUPLING BOSS USA E2M28/30 is a special replacement part made for Edwards E2M28 and E2M30 rotary vane pumps.
The COUPLING COVER EH1200 C/SEAL PK 1 is a complete replacement cover for the Edwards EH1200 mechanical booster pump. It comes with the seal already included.This cover bolts onto the side of the pump where the motor connects to the pump shaft. It protects the coupling area and keeps the oil inside. If your existing cover is cracked, leaking, or damaged, this is the direct replacement you need.
The COUPLING COVER EH250/500 C/SEAL PK 1 is a complete replacement cover for the Edwards EH250 and EH500 mechanical booster pumps. It comes with the seal already included. This cover bolts onto the side of the pump where the motor connects. It protects the coupling area and holds the oil inside. If your existing cover is cracked, leaking oil, or damaged, this is the direct replacement you need. It fits both the EH250 and EH500 pump models .
This is a replacement Coupling Cover for Edwards EH2600 and EH4200 mechanical booster pumps. This is the large end cover on the coupling side of the pump. It houses the coupling mechanism and contains the oil reservoir. It is a heavy-duty metal casting made to OEM specifications.
The COUPLING ELEMENT EM18/28/30 is a rubber replacement part for Edwards rotary vane vacuum pumps. It is also called a spider. This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while absorbing vibration and shock. If your pump is noisy or vibrating too much, this part may be worn out. Replace it to make your pump run smooth and quiet again
The COUPLING ELEMENT RV PUMP is a rubber replacement part made for Edwards RV3 and RV5 rotary vane pumps This small rubber piece sits between the motor coupling and the pump coupling. Its job is to transfer power from the motor to the pump while soaking up vibration and shock. If your RV pump is noisy or shaking too much, this part is likely worn out.
This is a flexible coupling element for large Edwards E1/E2M series pumps. It cross-references to Edwards part number CUP0041. This is the rubber or plastic insert that connects the motor to the pump. It absorbs shock and handles minor shaft misalignment. Fits E1M175, E1M275, E2M175, and E2M275 models.
This is a replacement Coupling Enclosure (also called a coupling cover or guard) for Edwards EH Series mechanical booster pumps.It is a heavy-duty metal housing that covers the motor-to-pump coupling. It protects the coupling and keeps operators safe from moving parts.
Not a member? Create an account
Already got an account? Sign in here
